The frequency inverters use for control the motors and the DC/AC invertes using for convert the DC voltage to AC voltage.
Inverters convert DC electricity into AC electricity. Solar panels (and most small wind turbines) produce DC electricity. That electricity is used to charge a battery bank in off-grid systems or sent directly to an grid tie inverter which feeds the electricity directly to the electric grid. We offer some inverters which are capable of both working as an Off-Grid and an On-grid inverter.
Garmin Nuvi 1410 1410T FULL LCD Screen Display
Hybrid Inverters
These inverters are primarily used for grid-tie purposes but also have the added feature that they provide backup power to your home / office when the electric utility fails.
Off-Grid Inverters
These inverters are principally meant to be used with solar for a home or business totally disconnected from the electric utility company. They can also be used for providing emergency backup power to homes that currently use the power from an electric company. Inverters with the built-in AC charger option are particularly well suited to providing seamless backup power.
Grid-Tie Inverters
Inverters which are connected to your electric utility company and do not use a battery bank. These "grid-tie" systems tend to be lower in cost due to the fact that they don't use batteries. However, if the utility company's power goes down then your system will also shut down. If blackouts are frequent in your location or you want to have backup power, consider purchasing an inverter that is Hybrid.
5-Inch Innolux AT050TN34 V.1 LCD Screen Display Ecran TFT
A devise used to convert direct current into alternating current.
Inverter - It is used for saving a power in battery. Inverter are very useful for tamilnadu especially chennai.
In terms of electrical power, an inverter converts direct current (DC - as in batteries) to alternating current (AC - as in what is present at electrical outlets).
An inverter would be used in a car, for example, to run an AC-powered "appliance" (laptop computer for example) in the absence of an AC outlet.
Garmin Nuvi 1450 1450T & 1460 1460T Full LCD
2015年6月7日星期日
2015年6月3日星期三
Help me for screen
I've cracked my screen and after looking for the web, I decided to do at my own risk. Now, I've seen a lot of people complaining about buying counterfeit screens at amazon/ebay and they face light bleed, different color or textures.
edit: I've contacted the seller asking if it was really OEM and they responded with: "This item is OEM part,that means the LCD display and the frame is original,and with grade A touch screen. So it of great quality and best price.Our purchase team will test each item well before shipping.".
I tried to squeeze it all back together and the screen ended up cracking quite easily (very cheap product) so I couldn't even return it and accepted the loss. Hopefully the suggested one from Amazon from above is good, let me know how it works out as I may be in the market for another one.
I've tried to buy from EtradeSupply but their shipping cost to Portugal (where I live) is about the same price of the product, which means that I would have to spend almost the same that LG is asking for the repair.
Well, what happened to your product? Have you tried to return the item?
I'm also Portuguese and ordered a new screen + frame + back cover from Etrade Supply after catastrophic damage to the whole thing around this time last year. I don't remember the price exactly for the whole shebang, but I can say the screen and other parts are top notch, and I've had zero problems whatsoever with them. If you want peace of mind, buying from them is probably your best bet.
It looks like they may ship to you if you purchase directly. At least Portugal is an option for estimating shipping. Looks like about the same price as the one you found on eBay though, so not sure if its any help.
Also, I ripped my front camera cable when putting the motherboard back in, so be very careful. I had to physically disconnect the front camera to get the camera app to be ale to connect to my rear camera again, but now I have a fully functional N5 minus the front camera, which I never use anyway.
I this installed one a few days ago and it seems perfect so far. It shipped from China but I got it in about 1 week (about 3 weeks ahead of forecast).
I took a chance on one that has 2 horrible ratings and it was complete crap. Very low brightness level and flaws all over the place.
For sure go with one that has good ratings and get one that has a frame.
Electronic projects
I've made several projects with Arduinos, and for my latest project, I decided to buy a 128x64 LCD (not OLED) from China. With previous LCDs, they always took care of the hard stuff for you. They had a separate chip on board (probablynot a shift register, but an MCU - thanks. that allows you to communicate via serial, and you only needed 2 pins to do it. This time, though, it's just a screen, and I have no idea how to use it.
Obviously, this is now beyond my skill level, so my question is how can I make this thing work with fewer pins? I plan on attaching this to a project on an Uno, so I need to reduce the number of pins this screen will take up.
I'm not asking you to do my homework for me, though. I really do want to learn more about whatever I need to know to make this work, so if you can suggest some reading, or other similar projects where someone explains how this is done, that would be greatly appreciated.
After all the projects I've done with Arduino, I really want to get into more advanced stuff, so I figured this would be a good first step towards learning more about what's going on behind the black curtain, so to speak. I've never really dug into library files, and I've only done a few small analog electronics projects, so I'm hoping this will be a good stepping stone to getting there.
When I got my degree we did not learn how to read data sheets. You just had to figure it out yourself. Make no mistake about it, finding, reading and understanding data sheets is an important part of "low level" engineering. As for finding a library somewhere on the internet and blindly using it may work at some companies and others absolutely not.
If you want to pursue embedded design and programming you probably want to get away from the Arduino software platform and start coding in straight C or C++ using the development tools from Atmel.search in your state with the keyword "arduino". 0 hits in my state. Then search on "embedded". Dozens of hits pop up.
Just to learn, I've taken a few components that I use (chips, mainly) and for which I had a library, and started to figure out the datasheet and see how it matches up with the library. For one of them I've rewritten the library, as the one I had was just a bunch of (badly written) functions and wasn't that easy to use, so I made one that works as a class. I specifically did not look at the original library again when I started programming and used the datasheet for that.
Once you've seen enough of those, I suppose you'll get better at it. Some datasheets totally suck though. I still have a lot to learn.
I have to say that the software was the easiest part for me as I'm a software developer, but even if you aren't it'd be another chance to learn.
Sometimes there are tutorials too that explain a lot more than just how to use it.
GPS talking
So when it was first unveiled at last year's I/O, one of the things they underscored was that Android Auto was deeply integrated with the hardware of the car itself - you're used to using your phone in the car for Google Maps, but why not be able to harness that nice big navigation LCD and the powerful external GPS antenna on your roof?
How much of that is actually a reality here? I understand that it's primarily a video feed / screen cast coming from the phone, but there's clearly some two-way communication happening as well to enable things like touch screen input, the voice button on the steering wheel, etc. Is it taking advantage of the car's GPS antenna? Is it possible to get OBD2-type data via Android Auto, enabling something like Dash or Automatic without the need for a bluetooth OBD dongle? Seems like that'd be a pretty big win for such apps if so.
I frequently baffle customers with PC-problems by the turning it off-and-on again trick level 2: instead of just shutting down their PC and powering it on again, I'll recommend to disconnect the power cord, push the power button, reconnect and then power it on again. This seems illogical to most people, but it makes all capacitors in the machine to drain any residual charge, which puts it in a (more) defined state.
The "have you turned it off and back on?" works for sewing machines, too…much to their users frustration. I’ve had this conversation twice in the last week-two different users, two completely different sewing machines.
Person A brings her machine in, saying that her embroidery function is out of step between its halves; that is, the right half of the ducky/flower/whatever is correct, but the left half is mangled, significantly offset from the right half, or nonexistent. Her machine has an LCD screen, meaning it’s computerized, and she tells me she’s shut it off and turned it on-even unplugged it-several times now, with no luck.
Garmin Nuvi 3790 T 3760T 3750 3790LTM 4.3" Full LCD Screen
Garmin Nuvi 3790 T 3760T 3750 3790LTM 4.3" Full LCD Screen
I test-sewed it and got the same offset, mangled daisy. I unthreaded it, turned it off, unplugged it, turned it back to on and let it sit a minute. Then I did everything in reverse-turned it to off, plugged it in, turned it on, rethreaded it. Ta da! A nice, non-mutant daisy. I ran through each of the stitch charts, checking to see that I wasn’t missing a step motor gone wonky, and everything was fine. Total time: less than 10 minutes. I explained, and Person A sighed, laughed, and left, shaking her head.
Person B brought her machine in, complaining of major thread barf. (Where the thread turns into a giant wad of loops and tangles on the back of the fabric. There are several causes, but the most common one is 'because'.) Her machine is a cool old Morse 4400, looks like the dashboard of your granddad’s Buick, and is about as far from computerized as you get. I test-sewed it, and got the same wad of tangle. I unthreaded it, took the bobbin case out, put the bobbin case back in, then rethreaded the upper thread path. Test-sewed it again, and it was fine. Ran it through its various stitches, just in case, still fine. Total time: less than 10 minutes. I explained, and Person B sighed, laughed, and left, shaking her head.
Why did either work? In person A’s case, what made the difference was that I shut it off before I rethreaded it. There are sensors in the thread path that detect the presence of thread (for things like setting thread tension), and don’t lose their setting when you shut the machine off. By unthreading it while it was off, and then turning it on, it registered that I was rethreading it and reset all of its internal settings, which solved the issue.
In Person B’s case, who knows? Maybe she didn’t hold her tongue right. Maybe it was my mighty tech aura-that happens too. There are no sensors, and you can see the entire thread path. I’ve seen sewing machine manuals from the 1880’s that tell you your first troubleshooting step should always be to rethread the machine. Person B is certainly experienced enough to have tried it herself before she came to me. But sewing machines are still just machines, and sometimes, for no apparent reason, they just go kablooey. And sometimes, also for no apparent reason, rethreading makes them behave.
Repairing a DVD with a broken capacitor
a dude i know, who had a computer shop, closed it, so he told me about giving to me some stuff he had there. Well, lot of crap, lot of broken stuff, but also some useful things. Some things working, some of them quite modern, some of them working but quite older (some Pentium 2 computers... and well, older computer with the typical flexible floopy disks).
So some of those things were DVD players. About... 5 or 6. Indeed one was working, i gave it to my grandma. The rest, doesn't work, some of them can't read DVDs, and others just don't turn on. So i saw 2 of them that can read USBs and SDs and also have DVB-T, so i opened them and i saw, on both of them, the typical exploded capacitor... on the power supply. So i replaced it for another and now it works :D
I made a crazy shit, instead of just welding it to the power supply board, i welded it to a random board i found somewere and then attached 2 cables between it and the old, broken capacitor contacts. Basically, I located the broken capacitor, removed it, and placed a new one of the same specs that the broken one (capacity, voltage and electrolytic).
I know this is a very common issue and very known to be solved, but... well, just for sharing something over here, i saw some people doing the same with more stuff... so I though, let's repair more broken shit I have. I also' got 3 broken LCD screens (with luck, they might have broken capacitors to be replaced :B) and lots of not-working motherboards, some of them also with exploded capacitors.
This is a very common problem that can be easily solved with just basic electronic knowledge... or maybe even without them, just identifying the broken capacitor (or capacitors), identifying the capacity of it (on F) and the voltage (theorically they can be replaced with other capacitors with more voltage), and respect the polarity (since most of these capacitors are electrolytic, and they have a + and - sides, identified on the capacitor with a vertical bar with ------- on it).
The best camera for taking selfies and pictures of people
Nikon
and Canon and several other brands make good cameras at various price
levels. You presumably need one with a "front screen" so that you can
line up your selfies well.
LMS350GF12 -015 LMS350GF12 -REV0 LCD Screen Display
The Canon G7x could be a good choice. Excellent image quality. The LCD flips up for selfies. Tilted up 90 degrees it can be good for photographing others without looking too obvious that you are taking their pictures. Lack of a remote control connection is a shortcoming.
With a 1/1.7" sensor, the Nikon P7800 is better than bridge cameras, not as good as the super-premiums like the G7x. Articulating LCD, 28-200mm zoom range, hotshoe, and compatible with infrared remote.
A DSLR with articulating LCD could be okay. A bit heavy and awkward for selfies. A left-handed hold could work. A wrist strap is recommended. Op/Tech USA makes one suitable for DSLR's.
The Nikon D5500 is probably the lightest DSLR body that has the articulating LCD.
LCD Screen Display For Garmin Nuvi 1350 1390 1350T 1390T 1690 4.3-inch TFT( Vervion 1--LQ043T1DH01)
Remember to use peripheral vision to see the LCD, but look into the lens if you want to look like you are looking at the person looking at the picture.
It's against the law to shoot people with a cannon , except in North Korea...
I think Walmart sells a selfie phone just for that purpose.
If you're not really interested in photography , you won't need anything better...
There's no one best for everyone. I've known people to get rid of their $3,000 DSLR for a cheaper one from another brand because of a feature or two that is critical for their needs. You state that you want to take selfies and pictures of people. Well, that's something that just about any camera will do, and do well.
LQ043T1DH42 LCD Screen Display Ecran Panel 4.3-inch TFT
In your case, we can lower the number of options by looking at which are not good for your needs. For example, you really shouldn't even consider a DSLR for taking selfies. It's far too big and bulky. You can also eliminate any camera that doesn't have a fully-articulated LCD screen which is a must-have feature for selfies.
Next, since you want to take pictures of people, what makes one better than another? In short, it's the size of the sensor. As the sensor size increases or decreases, so does the required focal length of the lens for any given angle of view. This change has an affect on image quality in that as you decrease the size of the sensor, your lenses become physically shorter. For example on a camera with a sensor of only 1/2.3" (bridge cameras and smartphones) a 20mm lens has the same angle of view as a 112mm lens on a full-frame 35mm format sensor. So what's the big deal? As the focal length of the lens decreases, the area that you get in focus (Depth of Field) increases. Therefore, someone using a a 1/2.3" format camera will find it impossible to blur out backgrounds which is what you really want to do when taking people pictures.
So this narrows your options to those cameras with a larger sensor (buy the largest one you can afford) and one with a fully-articulated screen. Nikon and Canon do make great stuff, but that's not to say that they make the best of all types and models at all price points. Sony, Pentax, Olympus, and Fuji are also fantastic cameras. All of these 6 brands have cameras that will be the best for certain users.
Garmin Nuvi 3790 T 3760T 3750 3790LTM 4.3" Full LCD Screen
Your criteria of selfies and people is rather narrow. What else do want to do? Do you need exposure control? With cameras that have a 1/1.7" or smaller sensor, you tend to not get exposure control as these are typically simple point and shoot cameras. However, once you're in the Micro 4/3, APS-C formats, then you're getting a much more serious camera with far more control over the image-making process, much better image quality too. I think that the Micro 4/3 format could be the perfect blend of control, image quality, and size too. In M43 cameras, Panasonic and Olympus are your best options.
I'll agree with some of what Frank and Ned say. The DSLR is a good way to go Vs a phone; picture quality is way better. (I guess you could consider a small point a shoot but you would not be able to use the LCD screen as much so less you NEED a very small item, put a pin in that idea)
Large sensor is good but full size is just a LOT to spend; the smaller formats will give you a lot of bang for the buck.
Touch Screen Digitizer For TomTom tom One V3 3rd Edition 3.5-inch Ecran Tactile
I got a DSLR with an articulated LCD screen and it is great for selfies and covert shots. I had used a Hasselblad so I did not have to "look like I was taking a photo" in the direction of someone, but that old thing just made too much noise and what are yea going to do with 120 film today.....so that LCD screen is great to help you now put a camera in a way that it does not make it look like you are taking a photo and/or just get a great angle.
Another item that you may will wish to have is a GOOD zoom lens; I got one that went from 18 to 200mm and it will allow you get that close selfie with the wide angle and has enough flexibility to compose just about any group on the street if that is what you are talking about with pictures of people. Maybe think about a 10 mm fisheye as a next lens; it will be wild and wide for hand held group shots, selfies, and let you get a lot in the field with you in the foreground. Granted you have to see what it looks like as it is not for everyone.
LCD Screen Display Ecran Panel For A050FW03 (400) V4 V.4 5-inch TFT
One other thing the Nikon has is the ability to pick faces and focus on them in an auto mode. This is good for focus and exposure.
When I've got the Nikon D5300, it is going out of production and the D5500 as Ned noted would be a good pick. However, I've got no clue what you have as personal needs and some time in a store with a good salesman would give you some real world knowledge and the feel in the hand need to make a confident choice. I had been a lifelong Canon guy and only went with Nikon last fall when picking based on some features and what I hoped was an open mind but I still feel a bit of a brand trader.
The best choice is one you make the features I suggest may be found on a number of brands.
5 inch LMS500HF06-002 LCD Screen Ecran panel
LMS350GF12 -015 LMS350GF12 -REV0 LCD Screen Display
The Canon G7x could be a good choice. Excellent image quality. The LCD flips up for selfies. Tilted up 90 degrees it can be good for photographing others without looking too obvious that you are taking their pictures. Lack of a remote control connection is a shortcoming.
With a 1/1.7" sensor, the Nikon P7800 is better than bridge cameras, not as good as the super-premiums like the G7x. Articulating LCD, 28-200mm zoom range, hotshoe, and compatible with infrared remote.
A DSLR with articulating LCD could be okay. A bit heavy and awkward for selfies. A left-handed hold could work. A wrist strap is recommended. Op/Tech USA makes one suitable for DSLR's.
The Nikon D5500 is probably the lightest DSLR body that has the articulating LCD.
LCD Screen Display For Garmin Nuvi 1350 1390 1350T 1390T 1690 4.3-inch TFT( Vervion 1--LQ043T1DH01)
Remember to use peripheral vision to see the LCD, but look into the lens if you want to look like you are looking at the person looking at the picture.
It's against the law to shoot people with a cannon , except in North Korea...
I think Walmart sells a selfie phone just for that purpose.
If you're not really interested in photography , you won't need anything better...
There's no one best for everyone. I've known people to get rid of their $3,000 DSLR for a cheaper one from another brand because of a feature or two that is critical for their needs. You state that you want to take selfies and pictures of people. Well, that's something that just about any camera will do, and do well.
LQ043T1DH42 LCD Screen Display Ecran Panel 4.3-inch TFT
In your case, we can lower the number of options by looking at which are not good for your needs. For example, you really shouldn't even consider a DSLR for taking selfies. It's far too big and bulky. You can also eliminate any camera that doesn't have a fully-articulated LCD screen which is a must-have feature for selfies.
Next, since you want to take pictures of people, what makes one better than another? In short, it's the size of the sensor. As the sensor size increases or decreases, so does the required focal length of the lens for any given angle of view. This change has an affect on image quality in that as you decrease the size of the sensor, your lenses become physically shorter. For example on a camera with a sensor of only 1/2.3" (bridge cameras and smartphones) a 20mm lens has the same angle of view as a 112mm lens on a full-frame 35mm format sensor. So what's the big deal? As the focal length of the lens decreases, the area that you get in focus (Depth of Field) increases. Therefore, someone using a a 1/2.3" format camera will find it impossible to blur out backgrounds which is what you really want to do when taking people pictures.
So this narrows your options to those cameras with a larger sensor (buy the largest one you can afford) and one with a fully-articulated screen. Nikon and Canon do make great stuff, but that's not to say that they make the best of all types and models at all price points. Sony, Pentax, Olympus, and Fuji are also fantastic cameras. All of these 6 brands have cameras that will be the best for certain users.
Garmin Nuvi 3790 T 3760T 3750 3790LTM 4.3" Full LCD Screen
Your criteria of selfies and people is rather narrow. What else do want to do? Do you need exposure control? With cameras that have a 1/1.7" or smaller sensor, you tend to not get exposure control as these are typically simple point and shoot cameras. However, once you're in the Micro 4/3, APS-C formats, then you're getting a much more serious camera with far more control over the image-making process, much better image quality too. I think that the Micro 4/3 format could be the perfect blend of control, image quality, and size too. In M43 cameras, Panasonic and Olympus are your best options.
I'll agree with some of what Frank and Ned say. The DSLR is a good way to go Vs a phone; picture quality is way better. (I guess you could consider a small point a shoot but you would not be able to use the LCD screen as much so less you NEED a very small item, put a pin in that idea)
Large sensor is good but full size is just a LOT to spend; the smaller formats will give you a lot of bang for the buck.
Touch Screen Digitizer For TomTom tom One V3 3rd Edition 3.5-inch Ecran Tactile
I got a DSLR with an articulated LCD screen and it is great for selfies and covert shots. I had used a Hasselblad so I did not have to "look like I was taking a photo" in the direction of someone, but that old thing just made too much noise and what are yea going to do with 120 film today.....so that LCD screen is great to help you now put a camera in a way that it does not make it look like you are taking a photo and/or just get a great angle.
Another item that you may will wish to have is a GOOD zoom lens; I got one that went from 18 to 200mm and it will allow you get that close selfie with the wide angle and has enough flexibility to compose just about any group on the street if that is what you are talking about with pictures of people. Maybe think about a 10 mm fisheye as a next lens; it will be wild and wide for hand held group shots, selfies, and let you get a lot in the field with you in the foreground. Granted you have to see what it looks like as it is not for everyone.
LCD Screen Display Ecran Panel For A050FW03 (400) V4 V.4 5-inch TFT
One other thing the Nikon has is the ability to pick faces and focus on them in an auto mode. This is good for focus and exposure.
When I've got the Nikon D5300, it is going out of production and the D5500 as Ned noted would be a good pick. However, I've got no clue what you have as personal needs and some time in a store with a good salesman would give you some real world knowledge and the feel in the hand need to make a confident choice. I had been a lifelong Canon guy and only went with Nikon last fall when picking based on some features and what I hoped was an open mind but I still feel a bit of a brand trader.
The best choice is one you make the features I suggest may be found on a number of brands.
5 inch LMS500HF06-002 LCD Screen Ecran panel
2015年6月2日星期二
What's wrong with my iphone
My phone screen shattered and when I got it fixed they told me that there was a bunch of internal damage. The components fell apart as soon as they did anything to the phone and I decided to replace it completely.
LTE430WQ-F0C LMS430HF02 REV0.4 LCD Screen Display Ecran Panel
You probably damaged a component required to turn the phone on and unfortunately, you can't figure out what is damaged until you remove the screen and see what's broken.
Garmin Nuvi 1300 1300T LCD Screen Display Panel+Touch Screen For AT043TN24 V.4
You should try to restart the phone again by holding the power and home buttons down for at least a minute. If that doesn't work, try to get the phone fixed by a professional. If you do decide to get it fixed, expect the phone to have a lot of internal damage that needs fixing.
LQ043T1DH42 LCD Screen Display Ecran Panel 4.3-inch TFT
yesterday I dropped my iphone 5c on my bathroom tile floor and the screen popped out a little and the home button was pushed it, I pushed the screen and home button back in and it was back normal but my screen was blue/black. Through all of this I was on the phone with my friend and after u dropped it she was still on the line. I figured it wasn't too damaged
Garmin Nuvi 3790 T 3760T 3750 3790LTM 4.3" Full LCD Screen
since she was still on the phone so I then started to restart it by holding the lock button and home button. When I did this it turned off and didn't turn back on, I tried putting it on the charger but it only vibrated every 10 seconds. I think the LCD is damaged and I need a new one because something similar happened like this to my phone bot too long ago but I wanted to make sure that it wasn't damaged more because I tried restarting it.
Mio DigiWalker C320 C520 C720 Car Charger
LTE430WQ-F0C LMS430HF02 REV0.4 LCD Screen Display Ecran Panel
You probably damaged a component required to turn the phone on and unfortunately, you can't figure out what is damaged until you remove the screen and see what's broken.
Garmin Nuvi 1300 1300T LCD Screen Display Panel+Touch Screen For AT043TN24 V.4
You should try to restart the phone again by holding the power and home buttons down for at least a minute. If that doesn't work, try to get the phone fixed by a professional. If you do decide to get it fixed, expect the phone to have a lot of internal damage that needs fixing.
LQ043T1DH42 LCD Screen Display Ecran Panel 4.3-inch TFT
yesterday I dropped my iphone 5c on my bathroom tile floor and the screen popped out a little and the home button was pushed it, I pushed the screen and home button back in and it was back normal but my screen was blue/black. Through all of this I was on the phone with my friend and after u dropped it she was still on the line. I figured it wasn't too damaged
Garmin Nuvi 3790 T 3760T 3750 3790LTM 4.3" Full LCD Screen
since she was still on the phone so I then started to restart it by holding the lock button and home button. When I did this it turned off and didn't turn back on, I tried putting it on the charger but it only vibrated every 10 seconds. I think the LCD is damaged and I need a new one because something similar happened like this to my phone bot too long ago but I wanted to make sure that it wasn't damaged more because I tried restarting it.
Mio DigiWalker C320 C520 C720 Car Charger
订阅:
博文 (Atom)